Pfaff 1209 manual

About the Pfaff synchromatic Pfaff synchromatic specifications. Related product manuals. Frequently Asked Questions Below, you will find the most frequently asked questions about the Pfaff synchromatic What size needle should I use? Which size of needle you can best use depends on the thickness of the fabric you use. With a thick fabric you should use a thick needle. The packaging of your needle states for which substances your needle is suitable. How long does a sewing needle last? Clean the parts in the vicinity of the sewing hook and the feed dog with a soft brush.

Do not oil the machine because it is maintenance-free, but now and then put a drop of oil into the hook raceway. Threading the needle Turn the balance wheel toward you to raise the needle and take-up lever 1 see drawing. Push control 25 down all the way. Draw the thread under fingers A and B, at the same time releasing control 25 and the thread.

The thread is then pulled through the needle eye. Seam is not uniform 1. Machine skips stitches Push needle up as far as it will go, its flat shank side facing toward the back. Tension out of adjustment. Check upper and lower tensions.

Thread too thick, knotty or hard. Use first-class thread only. Wrong needle used. Bobbin thread wound unevenly. Needle bent or blunt. Insert new needle. During bobbin winding, do not hold thread in hand, but pass it through thread retainer stud.

Machine threaded improperly. Check threading. Needle too thin for thread used. Select needle according to Needle and Thread Chart. Kinks appear on top and bottom of material. Thread machine properly and check both tensions. Needle not inserted correctly.

Machine feeds irregularly or not at all 2. Needle thread breaks For any of the above reasons. See par. Thread tension too strong. Regulate thread tensions. Poor-quality or knotty thread used. Use only good-quality thread. Lint has accumulated between tooth rows of feed dog. Remove needle plate and clean out lint. Feed dog dropped. Reverse-feed control is at left. Flick reverse-feed control to the right. Machine works heavily Thread ends in hook raceway.

Needle breaks 24 Needle not pushed up as far as it will go. Insert new needle and push it up as far as it will go. Needle bent. Needle too thin or too thick. Note Needle and Thread Chart. Needle bent and strikes needle plate because work is pushed or pulled. Let machine feed the work alone. Only guide the material lightly. Bobbin case improperly inserted. When inserting the bobbin case, press against it until t snaps into place.

Remove thread ends and put a drop of oil into hook raceway. Report abuse Libble takes abuse of its services very seriously. Product: Spam. Hateful or violent content For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

Do you have a question about the Pfaff or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question.

The more detail you provide for your issue and question, the easier it will be for other Pfaff owners to properly answer your question. View the manual for the Pfaff here, for free. This manual comes under the category Sewing machines and has been rated by 4 people with an average of a 8.

This manual is available in the following languages: English. Is your question not listed?